Citroen C3: Touch screen BLUETOOTH audio system / First steps
With the engine running, a press
mutes
the sound.
With the ignition off, a press turns the system on.
Increase or decrease the volume
using
the thumbwheel on the left-hand side.
To access the menus, press this
button
on the touch screen.
Press the back arrow to go back a level.
To clean the screen, use a
soft,
non-abrasive cloth (e.g. spectacles cloth)
with no additional product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
Certain information is displayed permanently in
the upper bar of the touch screen:
- Air conditioning information (depending on
version).
- Bluetooth connection.
- Indication of location data sharing.
Selection of the audio source:
- FM/AM/DAB radio stations (depending on
equipment).
- Telephone connected via Bluetooth and
Bluetooth multimedia broadcast (streaming).
- USB memory stick.
- Media player connected via the auxiliary
socket (depending on equipment).
In
very hot conditions, the volume may
be limited to protect the system. It may
go into standby (screen and sound off) for at
least 5 minutes.
The return to normal takes place when the
temperature in the passenger compartment
has dropped.
Multimedia audio system - Bluetooth® telephone
The
functions and settings described
vary according to the vehicle version and
configuration.
For safety reasons and
because they
require sustained attention by the driver,
the following operations must be carried out
with the vehicle stationary and the ignition
on:
Pairing the smartphone with the system in
Bluetooth mode...
Other information:
High-gloss paint
Do not use abrasive
products or
solvents, petrol or oil to clean the
bodywork.
Never use an abrasive sponge to clean
stubborn stains. Risk of scratching the
paintwork!
Do not apply polish in strong sunshine, or to
plastic or rubber parts.
Use a soft sponge and
soapy water or a
pH neutral product.
Gently wipe the bodywork with a clean
microfibre cloth.
Apply polish with ..
Audio settings
Press Settings to
display the main page.
Select "Audio settings".
Select "Ambience".
Or
"Position".
Or
"Sound".
Or
"Voice".
Or
"Ringtone".
Press "OK" to save the
settings.
The balance/distribution
(or spatialisation
with the Arkamys© system) uses audio
processing to adjust the sound quality
according to the number of passengers in the
vehicle.
Available only with the fro..